Greater Charlotte · NC & SCLicensed & Insured

Fence Installation
Residential to Commercial.

After nearly a decade tearing out failed fences, we built our own crew of designers and installers to put up ones that last. Wood, vinyl, aluminum, chain-link and farm fencing — residential to commercial — across the greater Charlotte region.

Get a flat quote(980) 351-5115 Request a Site Evaluation

★★★★★5.0 · Owner on every job· Charlotte-based operators

Why Raider builds fences

A decade tearing them out taught us how to build them right.

For almost ten years, Raider crews have pulled out old, leaning, rotted and storm-wrecked fences all over the Carolinas. We learned exactly how and why fences fail — posts tamped into dirt instead of set in concrete, the wrong material for the ground, corners that were never braced. So we did something about it: we built our own dedicated fence-building crew of designers and installers, with more than a decade of experience constructing every fence type, from backyard privacy to commercial security. Now one company tears out the old and stands up the new — built to outlast the fences we have spent years hauling away.

Our own crew of fence designers & installers
10+ years building every fence type
Residential to commercial projects
Remove the old & set the new — one crew, one visit
Posts set in concrete, corners properly braced
Flat written quotes, no games on price

Fencing

Any fence. Built right.

Wood privacy, vinyl, ornamental aluminum, chain-link, split-rail, farm and commercial security — we install every fence type for homeowners and businesses. And because we already run a demolition crew, we can tear out the old fence and set the new one in a single job.

Wood privacy & board fencing
Vinyl / PVC fencing
Aluminum & ornamental fencing
Chain-link — residential & commercial/security
Farm, ranch & split-rail
Gates, repairs & old-fence teardown

Call for a flat quote →

Straight answers on price

Fencing, priced up front.

Typical installed ranges by material and linear footage — grade, gates and tear-out of the old fence set the final number. Send the property line and fence type for a fast ballpark.

Wood privacy$28–48/ft

Chain-link$15–30/ft

Vinyl / aluminum$32–55/ft

Old fence tear-outQuoted with build

All-in, flat-rate — quoted precisely after a site walk. Never hourly.

How it runs

Four steps to a finished fence.

Site Walk

We walk the property within 48 hours, check access and utilities, and confirm the full scope.

Flat Quote

One written, all-in number within 24 hours. We handle permits and 811 utility locates.

We Do the Work

Our crew, our equipment. Old fence out, new fence set — posts, panels, gates and full haul-off.

Finished & Cleaned Up

New fence standing straight, gates swinging true, and the site left clean.

FAQ

Straight answers.

How much does a new fence cost in Charlotte?

Most residential fences are priced by the linear foot and material — roughly $15–30/ft for chain-link, $28–48/ft for wood privacy, and $32–55/ft for vinyl or aluminum, with gates, terrain and tear-out of the old fence factored in. You get a flat, written quote after we see the property line.

What kinds of fence do you build?

All of them — wood privacy and board, vinyl/PVC, ornamental aluminum, chain-link, split-rail and farm fence, plus commercial and security fencing. Residential to commercial, new installs and repairs.

Can you remove my old fence too?

Yes — that's our edge. We already run a demolition crew, so we tear out the old fence and set the new one in a single job, hauling off the debris. One crew, one number.

Do you handle commercial and security fencing?

Yes — commercial chain-link, security fencing, gates and access for job sites, lots and businesses across the Charlotte region.

Remove + replace